> For the complete documentation index, see [llms.txt](https://help.fairmarkit.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.fairmarkit.com/product-guides/auctions.md).

# Auctions

This guide is in two parts: For buyers covers creating, configuring, running and awarding an auction. For suppliers covers preparing, bidding and finalizing your quote.

Auctions let you run competitive, real-time price negotiations with your suppliers. You can run an auction on its own or as a follow-on round after an RFx, bid out several lots in a single event, and control exactly what suppliers can see while bidding is under way

### Enablement

If you don't see Auctions in your company, contact support&#x20;

* *Configuration available in SuperAdmin - Company - Settings(New) - Available auction types*

### Key concepts

**Auction event** — a single auction with one schedule (one open time, one close time, one set of extension rules). All lots in the event open, close and extend together.

**Lot** — a group of items that suppliers bid on. Your first lot comes from the Items module; you can add more lots as Worksheets. Each lot is ranked independently, so a supplier's standing on one lot has no effect on another.

**Starting price** — the price each supplier starts from on each lot or entire event. Starting prices are set per supplier, per lot or event, in the Suppliers tab.

**Post-bid window** — a configurable period after the auction closes when suppliers finalize their quotes. Award becomes available when this window ends.

***

### Auction statuses

Every auction moves through the statuses below. Status applies to the whole event — all lots always share the same status.

| Status        | What it means                                                                                             | What happens next                                                                                                   |
| ------------- | --------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------- |
| **Draft**     | The event is being set up.                                                                                | You schedule it, or cancel it.                                                                                      |
| **Scheduled** | The open time is set. The auction type and format settings are now locked. Suppliers can submit pre-bids. | The auction opens automatically at the scheduled time. You can still edit buyer-only fields, or cancel.             |
| **Live**      | Bidding is open.                                                                                          | The auction closes automatically at the close time, including any extensions. You can pause, close early or cancel. |
| **Closed**    | Bidding has ended.                                                                                        | The post-bid window starts.                                                                                         |
| **Post Bid**  | Suppliers finalize their quotes.                                                                          | When the window expires, award becomes available.                                                                   |
| **Awarded**   | You have completed the award.                                                                             | Final status.                                                                                                       |
| **Cancelled** | You cancelled the event from Draft, Scheduled, Live or Closed.                                            | Final status. All suppliers are notified.                                                                           |

{% hint style="info" %}
**Pausing is not a status.** A paused auction stays Live — bidding is simply stopped until you resume it. See Pause and resume.
{% endhint %}

***

## For buyers

### Create an auction

You can start an auction in three ways:

* **Global Create** — click **Create** and choose **Auction** (alongside Adaptive RFx and Adaptive RFx from Template).
* **Request** — on the request intake screen, choose the **Start an Auction** card.
* **As a follow-on round** — after an RFx round completes, create the next round as an auction. See Running an auction as a follow-on round.

The new auction opens in **Draft**, with four tabs: **Details**, **Items / Worksheet**, **Suppliers** and **Auction Setup**.

### Set up lots

1. Open the **Items** tab and add the line items for your first lot.
2. To add more lots, add a **Worksheet** for each one. Give it a name and add its line items (description, quantity, unit of measure and so on).

Suppliers can bid either a single total price for a lot or a price for each line item within it.

Keep in mind that:

* There is no per-lot timing. Every lot follows the event schedule set in Auction Setup.
* Every invited supplier can bid on every lot. You can't invite a supplier to only some lots.

### Invite suppliers and set starting prices

The **Suppliers** tab works like the standard invite module, with extra columns you edit directly in each supplier's row.

#### Starting prices

Starting prices can be set for entire event or per lot.

There is one price column per lot (**Lot 1 price**, **Lot 2 price**, **Lot 3 price**, …). Each cell is that supplier's starting price for that lot. This table is the only place starting prices are set — there is no event-level or lot-level starting price elsewhere.

#### Advancements and penalties - *<mark style="color:violet;">coming soon</mark>*&#x20;

Use advancements and penalties to favour or handicap individual suppliers in the ranking — for example, to reward local or ESG-qualified suppliers, or to penalize a supplier that hasn't passed certification.

{% hint style="warning" %}
The **Advancement / Penalty** column appears only if you switch on **Advancements & Penalties** in Auction Setup before the auction starts. You can't introduce adjustments once bidding is under way.
{% endhint %}

To set an adjustment for a supplier:

1. In the supplier's row, enter a percentage in the **Advancement / Penalty** field.
2. Choose **Advancement %** or **Penalty %** from the dropdown.
3. Select a **reason**. A reason is required.

Adjustments are always percentages, never fixed amounts. Each supplier can have one adjustment.

**How it works:** the effective bid is the supplier's real bid minus the advancement or plus the penalty. For example, a supplier with a 5% advancement who bids $41,900.00 has an effective bid of $39,805.00 for ranking. Their submitted bid — and any award — stays $41,900.00.

Effective bids drive rankings, standings, the Leading / Behind labels on lots and bid-step validation. Everything else uses the real price: savings, purchase orders, invoices, analytics and integrations.

### Configure the auction

Open the **Auction Setup** tab.

#### Choose the auction type

Select **English Reverse**, **Dutch** or **Japanese**. The type locks when the auction leaves Draft.

### English Reverse

**Schedule** — set the open and close time for the whole event.

**Extension rule** (optional) — automatically extends the auction when late bids arrive, so suppliers always get a fair chance to respond. When switched on, all fields are required:

* **Trigger Extension** — how close to the end a bid must arrive (for example, within 5 minutes).
* **Per-Hour / Per-Minute** — the unit.
* **Duration** — how long to extend by.
* **Max Count** — the maximum number of extensions. Unlimited extensions aren't supported.

An extension fires when a bid arrives within the trigger window **and** becomes the lowest bid, or when several bids arrive at the same price. The extension is added to the close time — an auction due to end at 12:00 with a 15-minute extension now ends at 12:15. Buyers and suppliers both see a notification when this happens.

**Decrement rule** (optional) — each new bid must beat a reference by at least a set amount ($) or percentage (%). Choose whether the reference is the supplier's **own bid** or the **leading bid**.

**Reserve price** (optional) — the price threshold for awarding the event. Suppliers never see it. Bids that don't meet it are still accepted, but the event is flagged for your review when it closes, and award isn't possible against a bid that doesn't meet the reserve.

**Hide closing time from suppliers** — hides the countdown timer and the closing-soon notifications.

**Show auction result** — when on, suppliers see whether their bid won or lost after the auction closes. When off, they see a neutral "awaiting buyer decision" message. This is not your award decision.

**Advancements & Penalties** — switches the Advancement / Penalty column in the Suppliers tab on or off for this event. When off, the column is hidden entirely - *<mark style="color:violet;">**coming soon**</mark>*&#x20;

**Post-bid window** — how long suppliers have after close to finalize their quotes.

#### Risk & fairness controls

**Bid confirmation guardrail** (off by default) — asks a supplier to confirm before submitting a bid whose total moves more than the configured percentage from their own last bid. This helps prevent typing mistakes.

#### Supplier view configuration

Control what suppliers see while bidding. A **live preview** panel shows the supplier's view as you change these settings.

**Bid standing indicator** — choose one:

* **Traffic light** — green for the lowest bid, amber within 5% of the lowest bid, red more than 5% above it. If two bids tie for lowest, both show amber.
* **Rank only**
* **Leading price ($)**
* **% behind leader**
* **Completely hidden**

**Show number of competing suppliers** — on or off (on by default).

### Schedule the auction

When setup is complete, click **Schedule**. The auction moves to **Scheduled**, and invitations go out to suppliers.

While the auction is Scheduled:

* The auction type and format settings are locked. You can still edit buyer-only fields.
* Suppliers can submit pre-bids. You can see them on the Compare page and in the Suppliers list, but you can't change or award them.
* Suppliers who haven't pre-bid get reminders 24 hours and 1 hour before the auction opens.
* You can cancel the auction.

The auction opens automatically at the scheduled time.

### Monitor a live auction

The **Live Monitor** shows the auction as it happens.

**Lot switcher** — select a lot (Lot 1, Lot 2, Lot 3…) to update the chart, legend and stat cards for that lot.

**Stat cards** — for the selected lot:

* Leading bid
* Starting price
* Savings % against the starting price
* Suppliers bidding (active of invited)

**Charts** — bids per supplier for the selected lot, and each supplier's total bid across all lots.

**Auction log** — a live feed of auction actions such as status changes, bids and pauses. The full event history is in the event's Activity Log.

While the auction is live, you can also edit buyer-only fields, pause and resume bidding, close the auction early and cancel it.

#### Pause and resume

Pause stops bidding without ending the auction. It's only available while the auction is Live.

* Suppliers see a banner — *"The auction is paused and will resume at the buyer's decision."* — and their page becomes read-only.
* The remaining time is preserved. A 20-minute auction paused halfway through resumes with 10 minutes left.
* The post-bid window moves by the length of the pause. If post-bid was due to start at 12:00 and you paused for 30 minutes, it starts at 12:30.

If the minimum active suppliers rule is set to auto-pause, an automatic pause behaves the same way.

### After the auction closes

The auction closes automatically at the close time (plus any extensions), or earlier if you close it manually. The post-bid window then opens, and suppliers finalize their quotes.

You'll be notified when suppliers submit final quotes. Award becomes available when the post-bid window ends — not before.

### Compare bids and award

1. Open **Compare Bids**.&#x20;
2. Award per lot or for the whole event, as you would in an RFx.

Keep in mind that:

* **The auction winner and the award are separate.** Who won the auction doesn't decide your award — you can award any supplier.
* Awards are always made at the supplier's real price.

***

### Running an auction as a follow-on round

When you create an auction as the next round after an RFx:

**Starting prices**

* Your starting prices from the previous round aren't carried over. Enter them in the new round.
* Each supplier's price from the previous round is carried into the new round as a prefilled draft. It isn't submitted automatically. You'll see it as that supplier's starting price in the Suppliers list.
* Prices carry over per lot. If a lot's items don't match between rounds, prices for that lot aren't carried over.
* If the supplier bid in a different currency, the price is converted to your currency. Small exchange-rate differences are expected.

**Items**

* Items left unsourced from earlier rounds aren't added automatically. Choose which ones to include from the sourcing scope list.
* Items can't be edited between rounds, so rounds stay directly comparable.

***

## For suppliers

### Before the auction opens

You'll receive an invitation by email and in the app when the auction is scheduled, plus reminders 24 hours and 1 hour before it opens if you haven't submitted a pre-bid.

#### Submit a pre-bid (optional)

While the auction is Scheduled, you can submit a pre-bid. It becomes your opening position when the auction goes live. If you don't pre-bid, you start the auction without a bid.

### Bidding in a live auction

You bid from the response page. At the top you'll see two banners:

* **Auction info** — what the event is and how it works.
* **Bid summary** — your total and current position, with the **Decline** button.

You'll also see a countdown timer (unless the buyer has hidden the closing time) and a notice that advancements or penalties may apply to your bid.

#### Enter your bid

Each lot has its own card, which you can expand or collapse. For each lot you can:

* Enter a **Total lot price** — every line item is rescaled proportionally to match, or
* Edit individual line items — the total updates automatically.

Both stay in sync, so use whichever is easier. When rescaling from a total, line prices are rounded down and any remainder goes to the last item; you can adjust individual lines if needed.

Depending on the buyer's settings, the line-item table shows your **Rank**, the **Lowest bid**, **Your bid** and **Other bids**, and each lot shows your bid history.

#### When you submit

1. **Confirm large changes.** If your new total moves more than the configured percentage from your last bid, you'll be asked to confirm.
2. **Minimum improvement.** Your bid must beat the reference by the minimum step. If it doesn't, it's rejected and you'll see why.
3. **Standing update.** Your standing updates immediately and the buyer sees your bid in real time.
4. **Extensions.** A lowest bid near the end may extend the auction. Everyone sees a notification when this happens.

You can't raise your price above your starting price.

#### Your standing

Your standing appears in the header and reflects the buyer's chosen indicator — for example a traffic light, your rank or how far you are behind the leader. Depending on settings, you may also get notifications when you're outbid or your rank changes, and when the auction is 15 and 5 minutes from closing.

#### If the auction is paused

You'll see a banner saying the auction is paused, and you can't bid until the buyer resumes it. Your remaining time is preserved.

### After the auction closes

If the buyer has chosen to show auction results, you'll see whether your bid won or lost. Otherwise you'll see that the result is awaiting the buyer's decision.

#### Finalize your quote

During the post-bid window, finalize your response. Your final quote can't exceed your final auction bid for the total or for any lot. You'll get a reminder before the deadline.

{% hint style="warning" %}
Confirm your final quote before the window closes — bids at close don't automatically count as final.
{% endhint %}

The buyer makes the award decision after the window ends, and you'll be notified by email and in the app if you're awarded.

***

### Dutch and Japanese&#x20;

### Japanese auction

The price moves **down** in steps. At each step, you either **Accept price** to stay in, or **Withdraw from auction**. If you do nothing, you're removed from the auction.

The buyer chooses how the auction runs:

* **Until the last supplier accepts**, or
* **To the end** — until the target price is reached while suppliers remain. This can produce multiple winners.

**Winner:** the supplier who accepted the lowest price.

The timer shows your time remaining to bid at the current step, rather than the event end time.

### Dutch auction

The price moves **up** in steps. You stay in the auction until you act:

* **Accept price** — you win at that price, the auction ends for you and you move to the post-bid stage to complete your response.
* **Withdraw from auction** — you leave.

In single-winner mode, the first supplier to accept wins and the auction ends immediately.

### Results (Dutch and Japanese)

* If you accepted the price, you'll see a green banner thanking you and asking you to complete your response details before the buyer's award decision.
* If you didn't win, you'll see a banner thanking you for taking part.

***

## Notifications reference

### Before the auction

| Notification               | When                     | Who      | Channel       |
| -------------------------- | ------------------------ | -------- | ------------- |
| Invitation                 | Auction scheduled        | Supplier | Email, in-app |
| Pre-bid response submitted | Supplier submits pre-bid | Buyer    | Email         |

### During the auction

| Notification   | When              | Who                   | Channel       |
| -------------- | ----------------- | --------------------- | ------------- |
| Auction opened | Auction goes live | All invited suppliers | Email, in-app |

### After the auction

| Notification                      | When                         | Who       | Channel       |
| --------------------------------- | ---------------------------- | --------- | ------------- |
| Finalize your response            | Before the post-bid deadline | Suppliers | Email, in-app |
| Final response submitted          | Supplier submits final quote | Buyer     | Email         |
| Auction successful / unsuccessful | Auction outcome              | Buyer     | Email         |
| Awarded                           | Buyer completes award        | Supplier  | Email, in-app |

***

## FAQ

**Can different lots have different end times?** No. All lots share the event schedule and extend together.

**Can I invite a supplier to only some lots?** No. Every invited supplier can bid on every lot.

**Can I award as soon as the auction closes?** No. Award becomes available when the post-bid window ends.

**Does the supplier who won the auction automatically get the award?** No. Award is a separate decision you make after the post-bid window.

**Can suppliers submit offline bids?** No. All bids are submitted through the platform.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.fairmarkit.com/product-guides/auctions.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
